Frigidaire Gallery FG4H2272UF Refrigerator Operation Manual

The Frigidaire Gallery FG4H2272UF is a 21.4 cu. ft. counter-depth 4-door French door refrigerator with stainless steel finish, featuring Custom-Flex™ temperature controls, automatic defrost, ice and water dispenser, and ENERGY STAR® certification. It offers CrispSeal™ compartments, SnackZone™ drawers, and adjustable storage. Ideal for modern kitchens, it's compatible with standard electrical and water systems. Below are the key specifications and operation instructions.

1. Key Specifications 2. Operation Instructions 2.1. Initial Setup 2.2. Temperature Controls 2.3. Ice and Water Dispenser 2.4. Care and Cleaning 2.5. Troubleshooting 3. Installation Instructions 3.1. Unpacking and Site Preparation 3.2. Leveling and Door Adjustment 3.3. Electrical Connections 3.4. Water Supply Connection

Key Specifications

Type: 21.4 cu. ft. counter-depth 4-door French door refrigerator with stainless steel finish
Compatibility:
- Residential use; ENERGY STAR® certified
- Standard 120V, 60Hz household current
- Water pressure: 20-120 PSI for dispenser
- Hot water not required
Power Source:
- 120 V, 60 Hz; 15A dedicated circuit
- Grounded 3-prong outlet required
Electrical Rating:
- 15A fuse or circuit breaker
- 2-wire with ground
Dimensions: 35.75" W x 31.75" D x 69.75" H (with doors closed); Allow 1" clearance sides/top/back
Features:
- Capacities: Fresh Food ~15.7 cu. ft., Freezer ~9.8 cu. ft.
- Custom-Flex™ Temp Drawer (adjustable -6°F to 45°F)
- Express-Select® Controls with Quick Ice/Freeze
- SpillSafe® shelves, humidity-controlled CrispSeal™ crispers
- Adjustable door bins, LED lighting, SnackZone™ drawers
- Ice maker with on/off, through-the-door dispenser
- PureSource® Ultra II Water Filter
- Frost-free operation, Quiet Sound Technology
- Annual Energy: ENERGY STAR qualified
Operating Conditions:
- Ambient temperature: 55°F - 110°F (13°C - 43°C)
- Non-condensing humidity

Operation Instructions

Initial Setup

1. Unpack and Remove Materials: Remove all packaging, tape, and protective film from shelves and drawers.
2. Level the Unit: Adjust front rollers for stability (see installation).
3. Plug In: Connect to dedicated grounded outlet; avoid extension cords.
4. Set Temperatures: Initial: Refrigerator 37°F, Freezer 0°F; allow 24 hours for stabilization.
5. Install Filter: Insert PureSource® Ultra II water filter; flush 2-3 gallons of water.
6. Clean Interior: Wipe with mild soap before first use.
Note: Ensure proper airflow; do not block vents.

Temperature Controls

1. Access Controls: Use digital panel on dispenser.
2. Refrigerator: Adjustable from 33°F to 47°F; recommended 37°F.
3. Freezer: Adjustable from -6°F to 6°F; recommended 0°F.
4. Custom-Flex™ Temp Drawer: Modes: Meat/Snacks (37°F), White Wine (45°F), Deli/Snacks (37°F); press drawer control button to activate.
5. Quick Ice/Freeze: Hold for 3 seconds to activate for 12 hours; auto-off.
6. Alerts: Door ajar (after 5 min), high temp (above 55°F for 20 min), filter change.
Note: Sabbath Mode: Hold Alarm Reset 3 seconds (disables lights/dispenser/alarms).

Ice and Water Dispenser

1. Turn On Ice Maker: Switch to ON in freezer.
2. Select Type: Press for cubed or crushed ice; water paddle for water.
3. Prime System: After install, dispense 2-3 gallons to remove air.
4. Filter Replacement: Every 6 months; push down cover, twist out old, insert new, twist to lock, dispense 1.5 gallons.
5. Clean Ice Maker: Turn off, remove bin, empty/wash with soapy water, dry, reinstall.
Note: Discard first ice; for stuck ice, use warm water (no ice pick).

Care and Cleaning

1. Interior: Wipe with mild soap and water; dry thoroughly.
2. Shelves/Drawers: Remove and wash; SpillSafe® shelves wipe clean.
3. Exterior: Mild detergent; stainless steel cleaner with grain.
4. Coils: Vacuum every 6 months behind base grille.
5. Filters: Replace water filter every 6 months (WF3CB).
Note: No abrasives on plastic/doors; baking soda for odors.

Troubleshooting

Not Cooling: Allow 24 hours; check settings, seals, vents; level unit; clean coils.
No Ice/Water: Check supply, filter, ice maker on; doors closed; thaw tubing if frozen.
Noisy: Normal hum; level unit; clean coils; check loose parts.
Odors: Clean interior; baking soda; check humidity controls.
Door Not Closing: Level; adjust hinges; clean seals.
Light Not Working: Replace bulb (unplug first).
Note: High temp alarm: Hold Alarm Reset 3 sec; contact support if persists.

Installation Instructions

Warning: Disconnect power before installation. Follow local codes; improper setup may void warranty.

Unpacking and Site Preparation

Remove from carton; inspect for damage.
Choose location: 1" clearance sides/top, 2" rear; near water line.
Ensure floor supports 350 lbs.
Protect flooring during move.

Leveling and Door Adjustment

Adjust Rollers: Turn front leveling screws to raise/lower.
Check Level: Use bubble level side-to-side and front-to-back.
Door Alignment: Adjust hinges if misaligned; flipper mullion if needed.
Secure: Ensure stable; doors close properly.

Electrical Connections

120V/15A dedicated grounded outlet; no extensions.
Plug directly into wall.
Avoid power strips.

Water Supply Connection

1/4" copper tubing; shut-off valve within 6 ft.
Connect to inlet at rear; use compression nut/ferrule.
20-120 PSI; flush line before connecting.
Coil excess tubing behind unit.